manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 68 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 68

56

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Install RAM Mount

Before installation begins, verify you have the applicable vehicle mounting bracket 
assembly components necessary, as shown in the following figures.

Components - RAM Mounting Kits

Mounting kits that do not include an external keyboard are shown below. 

Mounting kits that include a provision for an external keyboard include the parts on this 
page plus the parts on the next page.

In addition to the kits below, individual RAM mounting components are also available.

Mounting Kits without Keyboards

Each mounting kit contains:

Caution:  This device is intended to transmit RF energy. For protection 

against RF exposure to humans and in accordance with FCC 
rules and Industry Canada rules, this transmitter should be 
installed such that a minimum separation distance of at least 
20 cm (7.8 in.) is maintained between the antenna and the 
general population. This device is not to be co-located with 
other transmitters.

RAM Ball (Size D) for back of Thor VM3 dock with 
hardware (screws and washers) to attach RAM ball to 
dock

RAM Arm (Size D), length varies by kit selected

One of three mounting options:

•

RAM Ball mount (Size D, may include 3 cone 
washers), or

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments