manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 13 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 13

CHAPTER

1

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

1

CUSTOMER SUPPORT

Product Service and Repair

Honeywell International Inc. provides service for all of its products through service cen-
ters throughout the world. To obtain warranty or non-warranty service, please visit 

www.honeywellaidc.com/locations

 to find contact information for your region’s service 

center. Be sure to obtain a Return Material Authorization number (RMA #). You should 
do this prior to returning the product.

Send Feedback

Your feedback is crucial to the continual improvement of our documentation. To provide 
feedback about this manual, contact the Honeywell Technical Communications depart-
ment at 

[email protected]

.

Technical Assistance

If you need assistance installing or troubleshooting your device, please contact us by 
using one of the methods below:

Knowledge Base

: 

www.hsmknowledgebase.com

Our Knowledge Base provides thousands of immediate solutions. If the Knowledge Base 
cannot help, our Technical Support Portal (see below) provides an easy way to report 
your problem or ask your question.

Technical Support Portal

: 

www.hsmsupportportal.com

The Technical Support Portal not only allows you to report your problem, but it also pro-
vides immediate solutions to your technical issues by searching our Knowledge Base. 
With the Portal, you can submit and track your questions online and send and receive 
attachments.

Telephone:

 

www.honeywellaidc.com/locations

For our latest contact information, please check our website at the link above.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments