manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 47 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 47

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

35

USB Connector(s)

An additional USB host port is located on the top of the Enhanced Dock. Lift the cover to 
access the USB port.

Ethernet Connector

An Ethernet port is located on the top of the Enhanced Dock. Lift the cover to access the 
Ethernet port.

 

Standard Dock

Enhanced Dock

The USB or USB1 connector is a D-
9 female connector located on the 
back of the dock. See 

USB and 

USB1 Connector

 for connector pin-

out detail.

The USB-2 connector is a D-15 
female connector located on the 
back of the dock. See 

USB2 

Connector

 for connector pinout 

detail.

Power the Thor VM3 off before 
attaching a cable to any port (serial, 
USB, Audio/CAN, etc.).

COM1

COM2

USB

CANBUS/AUDIO

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments