manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 271 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 271

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

259

To save changes, tap Apply the button. Confirmation dialogs may be displayed.

To exit without saving changes, tap the X in the upper right of the window.

Tap restore default values, tap the Restore Default Values then tap Apply.

Radio

Note:

For CCX to be enabled, two settings must be enabled:

•

CCX must be enabled (checked) on this screen.

•

Enable Atheros Connection Settings must be enabled (checked) on the 

Connection

 tab.

If both settings are not enabled, the WLAN radio does not identify itself as CCX V4 compatible when 
associating to an access point.

CCX

Use CCX (Cisco Client Extensions) for faster roaming. Default is enabled.

CCKM

Use CCKM (Cisco Centralized Key Management) for faster roaming. Default 
is enabled.

Power Save

Set the power save level. Options are Off (default) and Auto-PSM.

Note:

Power save level is reset to the default (Off) after reboot.

Band Selection

Select the bands to use. Options are: A, BG, G, ABG (default).

DataRate 
Selection

To limit data rates, check the Limit DataRate checkbox. If checked, select the desired 
rate (MCS0 to MCS15). MCS0 (Modulation and Coding Scheme) 0 is slowest, MCS15 
is fastest but subject to more errors. Default is disabled.

Note:

DataRate selection is reset to default (Disabled) after reboot.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments