manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 58 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 58

46

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

UPS Status LED

The color of the UPS LED identifies the charge level, while the behavior of the LED iden-
tifies the charging state.

Charge Level

Charging State

UPS Unavailable

SSD (Solid State Drive) LED

LED Color

Status

Green

Fully charged (>90%)

Amber

Less than fully charged, but more than 2 minutes runtime remaining

Red

Low battery, less than 2 minutes runtime until shutdown

LED Behavior

Status

Slow Blink
(1 sec. on, 3 sec. off)

Charging

Fast Blink
(1/2 sec. on, 1/2 sec. off)

UPS supplying power and discharging

On

Neither charging or discharging

Off

Unit is off or is in Suspend

LED Behavior

Status

Super-Fast Blink
(1/8 sec. on, 1/8 sec. off)

•

Out of charging temperature range

•

Charge  timeout

•

UPS is not installed

LED Behavior

Status

Flashing Green

SSD read or write activity

Off 

No SSD read or write activity

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments