manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 136 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 136

124

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Disconnect UPS Battery

Equipment Required

The following equipment is user-supplied:

•

Torquing tool capable of measuring inch pounds

•

#2 Phillips screwdriver bit

Disconnect Procedure

1. For convenience, the Thor VM3 can be removed from the dock, though it is not nec-

essary.

2. If the Thor VM3 remains in the 

dock, disconnect the power cable 
from the dock.

3. Place the Thor VM3 in Suspend by 

pressing the Power button.

4. Place the Thor VM3 face down on 

a stable surface.

5. Use a #2 Phillips bit to loosen the 

captive M3 screws on the access 
panel with the mSATA and SIM 
labels.

6. Locate the small push button 

located just below the SIM card installation slot.

7. Press the push button to disconnect the UPS. The UPS battery 

maintains its charge but is disconnected from the power circuitry of 
the Thor VM3.

8. Reattach the access panel, torquing the M3 screws to 7.0 ± 0.5 inch 

pounds using a #2 Phillips bit.

9. When the Thor VM3 is attached to external power, the UPS battery 

is automatically reconnected.

10. Restart the Thor VM3

Caution:  The UPS battery must be disconnected before you ship the Thor 

VM3 or 

Replace Front Panel

.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments