manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 377 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 377

CHAPTER

C

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

365

THOR VM3 AGENCY INFORMATION

Thor VM3 vehicle-mount computers meet or exceed the requirements of all applicable 
standards organizations for safe operation. The best way to ensure safe operation is to 
use the mobile computer according to the agency guidelines in this user guide and on 
the regulatory sheet shipped with the terminal. Read all guidelines before using your 
Dolphin terminal. To download product documentation for the Thor VM3 computer, go 
to 

www.honeywellaidc.com

. 

This documentation is relevant for the following Thor models: VM3.

The EU declaration of conformity, if applicable, and other publicly downloadable certifi-
cates are available at 

www.honeywellaidc.com/compliance

.

Label Locations

Compliance labels are located in the dock well area on the back of the Thor VM3, as 
indicated by the shaded areas below. The Thor VM3 must be removed from the dock to 
view the labels.

Model number, serial number and other identifiers are located on these labels.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments