96
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
cause the wiring insulation to deteriorate. Always route the cable so that it does not
interfere with safe operation and maintenance of the vehicle.
6. Provide mechanical support for the cable by securing it to the vehicle structure at
approximately one foot intervals, taking care not to over tighten and pinch
conductors or penetrate outer cable jacket.
7. Connect the watertight connector end of the power cable to the Thor VM3 dock
power connector by aligning the connector pins to the power connector; push down
on the watertight connector and twist it to fasten securely.
8. Secure the power cable to the Thor VM3 using the
.
9.
10. If using the
feature, install the screen blanking box or switch if not
previously installed.
11. Press the
on the back of the Thor VM3 dock.
12. Press the
on the front of the Thor VM3 to turn on the Thor VM3.
Summary of Contents for Thor VM3
