manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 342 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 342

330

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

   a) Give prominent notice with each copy of the object code that the

   Library is used in it and that the Library and its use are

   covered by this License.

   b) Accompany the object code with a copy of the GNU GPL and this license

   document.

  4. Combined Works.

  You may convey a Combined Work under terms of your choice that,

taken together, effectively do not restrict modification of the

portions of the Library contained in the Combined Work and reverse

engineering for debugging such modifications, if you also do each of

the following:

   a) Give prominent notice with each copy of the Combined Work that

   the Library is used in it and that the Library and its use are

   covered by this License.

   b) Accompany the Combined Work with a copy of the GNU GPL and this license

   document.

   c) For a Combined Work that displays copyright notices during

   execution, include the copyright notice for the Library among

   these notices, as well as a reference directing the user to the

   copies of the GNU GPL and this license document.

   d) Do one of the following:

       0) Convey the Minimal Corresponding Source under the terms of this

       License, and the Corresponding Application Code in a form

       suitable for, and under terms that permit, the user to

       recombine or relink the Application with a modified version of

       the Linked Version to produce a modified Combined Work, in the

       manner specified by section 6 of the GNU GPL for conveying

       Corresponding Source.

       1) Use a suitable shared library mechanism for linking with the

       Library. A suitable mechanism is one that (a) uses at run time

       a copy of the Library already present on the user's computer

       system, and (b) will operate properly with a modified version

       of the Library that is interface-compatible with the Linked

       Version. 

   e) Provide Installation Information, but only if you would otherwise

   be required to provide such information under section 6 of the

   GNU GPL, and only to the extent that such information is

   necessary to install and execute a modified version of the

   Combined Work produced by recombining or relinking the

   Application with a modified version of the Linked Version. (If

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments