manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 150 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 150

138

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

dialog from appearing. Once the drivers are loaded, the slot can be turned on. The 
value in the PCMCIA field is a DWORD, representing the number of seconds to wait 
after installing the CAB file, but before activating the slot (a latency to allow the 
thread loading the driver to finish installation). The default value of 0 means the slot 
is not powered on. The default values for the default radio drivers (listed below) is 1, 
meaning one second elapses between the CAB file loading and the slot powering up.

The auto-launch process proceeds as follows:

1. The launch utility opens the registry database and reads the list of CAB files to auto-

launch. 

2. First it looks for FileName to see if the CAB file is present. If not, the registry entry is 

ignored. If it is present, and the Installed flag is not set, auto-launch makes a copy of 
the CAB file (since it gets deleted by installation), and runs the Microsoft utility 
WCELOAD to install it. 

3. If the Installed flag is set, auto-launch looks for the FileCheck file. If it is present, the 

CAB file is installed, and that registry entry is complete. If the FileCheck file is not 
present, memory has been lost, and the utility calls WCELOAD to reinstall the CAB 
file. 

4. Then, the whole process repeats for the next entry in the registry, until all registry 

entries are analyzed.

5. To force execution every time (for example, for AUTOEXEC.BAT), use a FileCheck of 

“dummy”, which will never be found, forcing the item to execute.

6. For persist keys specifying .EXE or .BAT files, the executing process is started, and 

then Launch will continue, leaving the loading process to run independently. For 
other persist keys (including .CAB files), Launch will wait for the loading process to 
complete before continuing. This is important, for example, to ensure that a .CAB file 
is installed before the .EXE files from the .CAB file are run.

7. Note that the auto-launch process can also launch batch files (*.BAT), executable 

files (*.EXE), registry setting files (*.REG), or sound files (*.WAV). The mechanism is 
the same as listed above, but the appropriate application is called, depending on file 
type.

Note:

Registry entries may vary depending on software revision level and options ordered with 
the Thor VM3.

LAUNCH.EXE and Persistent Storage

If any of the following directories are created in the System folder, Launch automatically 
copies all of the files in these directories:

System\Desktop

copied to

Windows\Desktop

System\Favorites

copied to

Windows\Favorites

System\Fonts

copied to

Windows\Fonts

System\Help

copied to 

Windows\Help

System\Programs

copied to

Windows\Programs

AppMgr

copied to

Windows\AppMgr

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments