manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 166 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 166

154

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Bluetooth Printing

Start > Settings > Control Panel > Bluetooth Printing

To configure your computer for Bluetooth wireless printing, you need to:

•

Create an application that opens the wireless printing COM port on your computer. 
For help, see the Bluetooth Resource Kit, which is part of the Intermec Developer 
Library (IDL), available from the Intermec website at www.intermec.com/idl.

•

Select the current wireless printer on your computer. For help, see the Printer Options 
section of 

Enterprise Settings

Note:

You can also print wirelessly using Microsoft APIs with Bluetooth extensions for Winsock 
and Bluetooth. For help, see the Bluetooth Resource Kit documentation.

The Bluetooth Printing wizard supports the following Honeywell printers:

•

PR2

•

PR3

•

PB31

•

PB21

•

PB42

•

PB50

To connect a printer using the search option:

1. Turn on the printer.

2. Select Bluetooth Printing from the control panel.

3. Tap Search.

Note:

The printer can also be specified by taping the 

Manual

 button and entering the MAC 

address of the printer.

4. A list of available Bluetooth printers is displayed.

Note:

By default only printers are displayed in the search results.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments