Honeywell Thor VM3 User Manual Download Page 255

Page: 255 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

243

8. Select the User Credentials tab.

9. Select the desired credentials method of providing credentials. Prompt

automatically for username and password is recommended.

10. If saved username and password is selected, enter the credentials now.

11. Select the Authentication tab.

12. Select EAP-MSCHAPv2 as the authentication method.

13. Tap OK to close any open windows.

14. From the profile listing, make sure the desired profile is active.

15. Verify the connection using

Status

Summary of Contents for Thor VM3



























































































































































































































































































































































































Search results

Summary of Contents for Thor VM3

Reviews:

Honeywell Thor VM3, User Manual, Page: 255 / 378

Search results

Summary of Contents for Thor VM3

Reviews: