Honeywell Thor VM3 User Manual Download Page 80

Page: 80 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Step 8 - Attach Scanner Holder (Optional)

This step is only for use with the Enhanced Dock.

1. Attach the accessory RAM ball to the Enhanced Dock. There are two mounting provi-

sions, one on either side of the Enhanced dock and either can be used to mount the
scanner holder.

Note:

Some components eliminated for detail clarity.

2. Attach the RAM ball to the back of the scanner holder.

3. Slip the RAM arm over the accessory RAM ball.

4. Slip the RAM ball on the scanner holder into the RAM arm.

5. Tighten the knob on the RAM arm while adjusting to the desired angle.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Search results

Summary of Contents for Thor VM3

Reviews:

Honeywell Thor VM3, User Manual, Page: 80 / 378

Search results

Summary of Contents for Thor VM3

Reviews: