manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 224 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 224

212

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

ZoomZone

Start > Settings > Control Panel > ZoomZone

ZoomZone can be used to configure screen blanking behavior.

Motion Detection Action

Determine what to do when motion is detected:

•

Display Always Active - The display does not change when motion is detected.

•

Display Black - The display is blacked out when motion is detected.

•

Display freeze - The display is frozen at the time motion is detected.

•

Use Zoom Area - A preconfigured zoom area is displayed when motion is detected.

Motion Detection Method

Select the motion detection method.

The Thor VM3 supports the screen blanking box to determine motion. Select the port 
(COM1 or COM2) to which the blanking box is attached.

Note:

By default, COM1 and COM2 ports are used by Enterprise Data Collection. To use a COM 
port for screen blanking, access 

Enterprise Settings

 and set 

Data Collection > Tethered 

Scanners > Tethered Scanner (COMx) - Enable Scanner Port 

to off (where COMx is either 

COM1 or COM2). 

Motion Timeout Settings

Screen blanking can be configured to provide delays.

•

Delay on Motion - Configure the delay between motion detection and screen 
blanking. The default is 2 seconds.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments