manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 173 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 173

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

161

Date / Time

Start > Settings > Control Panel > Date/Time 

- or - Time in Desktop Taskbar

Use this Thor VM3 panel to set Date, Time, Time Zone, and assign a Daylight Savings 
location.

Factory Default Settings

There is very little functional change from general desktop or laptop Date/Time Proper-
ties options. 

Double-tapping the time displayed in the Desktop Taskbar causes the Date/Time Prop-
erties screen to appear. 

Date and time can be set to automatically synchronize with a time server on the Com-
munications tab of the Options control panel. See 

Autolaunch TimeSync

.

Time Zone

GMT-08:00

Daylight Savings

Enabled

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments