manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 290 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 290

278

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

System Settings

Use this screen to configure WWAN settings.

Enable Logging

Check to enable logging. Specify the maximum file size and the location for the log file.

By default logging is disabled.

TcpWindow Size=128k

Check to set the TCP window size to 128k.

By default this options is disabled.

Enable On-screen Connection Icon

Check to enable an on-screen connection icon. The icon is displayed in the lower right 
corner of the screen, above the date/time.

This icon is in addition to the connection icon in the system tray.

By default the on-screen icon is disabled.

Connected

Not connected

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments