Honeywell Thor VM3 User Manual Download Page 233

Page: 233 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

221

5. Tap Registry > Apply settings

6. Reboot the Thor VM3 for the new settings to take effect.

7. The ccf file can be used to configure another Thor VM3. See Example 4.

Example 4: Clone settings to another device

1. Create a ccf file using any of the above examples.

2. Copy the ccf file to \System\DDF on the destination Thor VM3.

Note:

Rather than using the CCU GUI, the command line can be used to apply the settings to the
destination device.

3. Open the CCU on the destination device.

4. Tap File > Open and select the ccf file that was copied to the device.

5. Tap Registry > Import.

6. When prompted to Default all Non-Configured Parameters:

•

Tap Yes to set all parameters not configured in the ccf file to defaults on the
destination device.

•

Tap No to apply the values from the ccf file and leave all other parameters as-is on the
destination device.

•

Tap Cancel to exit with no changes to the destination device.

7. Reboot the Thor VM3 for the new settings to take effect.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Search results

Summary of Contents for Thor VM3

Reviews:

Honeywell Thor VM3, User Manual, Page: 233 / 378

Search results

Summary of Contents for Thor VM3

Reviews: