manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 206 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 206

194

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Peripherals

Start > Settings > Control Panel > Peripherals

This panel is used to enable and disable the touch screen defroster.

Factory Default Settings

Defroster

Note:

Settings have no effect if the defroster is not installed.

The screen displays the information about the defroster:

•

If the defroster is installed

•

The current state of the defroster, ON or OFF

•

If the defroster is Enabled or Disabled

•

The defroster trip point.

Tap the Test button to determine the presence of the defroster. Use this button when the 
front panel of the Thor VM3 has been swapped. For example, if the Thor VM3 did not 
contain a defroster but a new front panel with a defroster is installed, tap the Test but-
ton to update the defroster presence status on this tab.

If a defroster is installed, the defroster can be switched between the Enabled and Dis-
abled states using the radio buttons on this tab. The default is Enabled.

Specify the Defroster trip point. The default trip point is 40º C (104º F).

Defroster

Defroster

Enabled (if installed)

Defroster Trip Point

40º C (104º F)

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments