Home
/
Honeywell
/
Thor VM3
/
User Manual

Honeywell Thor VM3, User Manual, Page: 220 / 378

Share

Page: 220 / 378

Honeywell Thor VM3 User Manual Download Page 220

208

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Memory

Move the slider to allocate more memory for programs or storage. If there isn’t enough
space for a file, increase the amount of storage memory. If the mobile device is running
slowly, try increasing the amount of program memory.

Device Name

The device name and description can be changed by the user. Enter the name and
description using either the keypad or the Input Panel and tap OK to save the changes.
This information is used to identify the Thor VM3 to other computers and devices.

Copyrights

This screen is presented for information only. The Copyrights information cannot be
changed by the user.

«
...
218
219
220
221
222
...
»

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments