Hitachi Dynamic Link Manager Page 91 User Manual Download

Page: 91 / 746

3. Creating an HDLM Environment

Note:

This subsection describes the operating environment common to SUSE LINUX

Enterprise Server 10.

•

Among the functions for SUSE LINUX Enterprise Server, HDLM only

supports CFQ, and the default I/O scheduler functionality.

•

An HDLM device that applies EVMS functions is not supported.

•

You cannot use DRBD functions in an environment where HDLM is

installed.

•

You cannot use HDLM in a User-Mode Linux environment.

Only kernels that are provided by OS distributors in binary format are supported.

HDLM supports an environment where an IA32 kernel is installed on a system

that uses an Intel CPU or AMD Opteron processor.

A gdb package of version 6.5-21.2 or later must be installed.

EM64T/AMD64

2.6.16.21-0.8-default

2.6.16.21-0.8-smp

2.6.16.46-0.14-default

2.6.16.46-0.14-smp

2.6.16.60-0.21-default

2.6.16.60-0.21-smp

2.6.16.60-0.21-xen

2.6.16.60-0.54.5-default

2.6.16.60-0.54.5-smp

2.6.16.60-0.54.5-xen

2.6.16.60-0.85.1-default

2.6.16.60-0.85.1-smp

2.6.16.60-0.85.1-xen

Kernel architecture

Kernel

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands

Hitachi Dynamic Link Manager, User Manual

Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands