manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 635 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 635

8. Messages

611

Managing the HDLM Configuration

.

KAPL10302-I

/sbin/dlmcfgmgr completed normally.

Details

The HDLM-configuration definition utility (

dlmcfgmgr

) has completed 

successfully.

Action

None. For details on the

 dlmcfgmgr 

utility, see 

7.3 dlmcfgmgr Utility for 

Managing the HDLM Configuration

.

KAPL10305-E

A special file could not be created. Filename = 

aa...aa

. Execute 

the DLMgetras utility to collect error information, and then 
contact your vendor or maintenance company.

Details

A logical device file for an HDLM device cannot be created.

aa...aa

: Logical device file name of HDLM device

Action

Execute the 

DLMgetras

 utility for collecting HDLM error information, and then 

contact your HDLM vendor or the maintenance company if there is a maintenance 

contract for HDLM. For details on the

 DLMgetras 

utility, see 

7.2 DLMgetras 

Utility for Collecting HDLM Error Information

.

KAPL10306-W

The configuration definition file is invalid. Refer to the 
Messages section of the HDLM User's Guide for instructions to 
correct this problem.

Details

The configuration definition file (

/etc/opt/DynamicLinkManager/

.dlmfdrv.conf

) is invalid.

Action

/etc/opt/DynamicLinkManager/.dlmfdrv.conf

 to an alias name and 

restart the host. The logical device file name of the HDLM device might be 

changed, so that after the host restarts, check the logical device file name. If the 

logical device file name was changed, modify the path to the upper-level program.

KAPL10308-W

The configuration definition file could not be created. Execute 
the DLMgetras utility to collect error information, and then 
contact your vendor or maintenance company.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments