manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 607 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 607

8. Messages

583

KAPL09083-W

The emergency license expired.

Action

Install a permanent license.

KAPL09087-E

The entered license key is invalid. Renewal of the license key 
will now stop. Obtain a valid license key, and then re-install 
HDLM.

Details

License renewal will now stop because an invalid license key was entered.

Action

Obtain a valid license key, and then re-install HDLM.

KAPL09088-E

The entered license key is invalid. The HDLM installation will 
now terminate. Obtain a valid license key, and then re-install 
HDLM.

Action

Obtain a valid license key, and then re-install HDLM.

KAPL09090-W

This operation will now be continued without updating the 
license.

Details

This operation will continue without updating the license.

Action

Install a permanent license at a later time.

KAPL09091-E

A fatal error occurred in HDLM. The system environment is 
invalid. Contact your HDLM vendor or the maintenance company if 
there is a maintenance contract of HDLM.

Details

A part of the HDLM configuration file is missing.

Action

Contact your HDLM vendor or the maintenance company if there is a 

maintenance contract of HDLM.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments