Hitachi Dynamic Link Manager, User Manual, Page: 231 / 746

3. Creating an HDLM Environment
207
19. Assign a name to the copied configuration that indicates that the configuration is
used for specifying the HDLM device.
• If you will use GRUB as the boot loader
Change
title
.
• If you will use ELILO as the boot loader
Change
label
.
20. Delete the
root
specification.
If you are using a kernel that supports Xen, delete the root device specification in
module
.
21. In
initrd
, specify the initial RAM disk image file you created in step 13.
If you are using a kernel that supports Xen, change the
initrd
file name
specified in
module
to the initial RAM disk image file you created in step 13.
When an option that depends on the user environment is specified, be careful not
to delete the option.
If you are using SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11 and
resume
is specified for the kernel parameter, then delete the
resume
setting.
22. Specify the configuration that will be used for booting.
• When GRUB is the boot loader
Specify the position of the valid
title
for
default
.
• When ELILO is the boot loader
Specify
label
for
default
.
23. Shut down the host.
Execute the following command to shut down the host:
# shutdown -h now
24. Change the configuration from a single-path configuration to a multi-path
configuration.
25. Start the host.
26. Update the information about the volume group.
Execute the following command to update the information about the volume
group.