Hitachi Dynamic Link Manager, User Manual

Page: 161 / 746

3. Creating an HDLM Environment
137
# /sbin/dlmcfgmgr -i
5. Start the HAL daemon.
Execute the
/sbin/service
command to start the HAL daemon.
# /sbin/service haldaemon start
Make sure that the HAL daemon is running.
Execute the
/sbin/service
command to make sure that the HAL daemon
is running.
# /sbin/service haldaemon status
3.5.4 Notes on an Upgrade Installation or Re-installation of HDLM
„
A license key is required to perform a re-installation or upgrade installation of
HDLM after the valid license period has expired.
To update the HDLM license, execute the
dlnkmgr
command's
set -lic
operation. The expiration time of the license key is determined by the type of
license key specified in the license key file or entered by the user. For information
on license key types and the
set
operation, see 6.6 set (Sets Up the Operating
Environment) .
„
The HDLM manager is stopped during an upgrade installation. Therefore, when
you perform an upgrade installation, stop any applications that require HDLM
manager operations, such as a log output operation.
• Because the HDLM manager is stopped during an upgrade installation, an
error log will not be output. Also, you will not be able to set up HDLM
functions. After the upgrade installation finishes successfully, immediately
restart the host.
• Do not cancel an upgrade installation.
3.5.5 Notes on a Device Manager Agent
„
When installing HDLM on a host where Device Manager agent 5.0 or later is
installed, do not execute any of the following commands of Device Manager
agent during installation:
hbsasrv, HiScan, hdvmagt_account, hdvmagt_schedule, hldutil,
TIC