3. Creating an HDLM Environment
297
If you have temporarily changed the settings so that domainU does not
automatically start in step 3, restore the previous settings.
3.23.7 Canceling the KVM Settings
If you are using KVM, you need to delete the HDLM device from the hardware
configuration file (
/etc/libvirt/qemu/
domain-name
.xml
). For details on the
hardware configuration file, see the OS documentation.
To cancel the KVM settings by using the
virsh
command:
1.
Execute the following command to check the domain name and operating status
of the guest OS.
# virsh list --all
Id Name State
----------------------------------
1 domK running
The underlined part indicates the domain name.
2.
If the guest OS is running, stop it.
For details on how to stop the guest OS, see the OS documentation.
3.
If necessary, delete the HDLM device from the hardware configuration file.
If you want to delete the HDLM device (
/dev/sddlmac
), delete the following
lines:
<disk type='block' device='disk'>
<source dev='/dev/sddlmac'/>
<target dev='hdb' bus='ide'/>
</disk>
4.
To migrate an environment that uses an HDLM device to an environment that uses
a SCSI device, change the HDLM device registered in the hardware configuration
file to a SCSI device.
The following example shows how to edit the hardware configuration file when
migrating the HDLM device (
/dev/sddlmad
) to the SCSI device (
/dev/sda
):
Before:
<source dev='/dev/sddlmad'/>
After:
<source dev='/dev/sda'/>
Summary of Contents for Dynamic Link Manager
