Hitachi Dynamic Link Manager, User Manual

Page: 431 / 746

6. Command Reference
407
device name is
/dev/sde
while confirming command operation.
# /opt/DynamicLinkManager/bin/dlnkmgr offline -path
-device /dev/sde
KAPL01052-I The currently selected paths will be changed
to the Offline(C) status. Is this OK? [y/n]:y
KAPL01053-I If you are sure that there would be no problem
when the path is placed in the Offline(C) status, enter
y. Otherwise, enter n. [y/n]:y
KAPL01061-I 1 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
-s
Executes the command without displaying the message asking for confirmation
of command execution from the user. Specify this parameter if you want to skip
the response to the confirmation message: for example, when you want to execute
the command in a shell script or batch file.
Example
The following example shows how to place a path, whose AutoPATH_ID is
000001
, offline without asking for confirmation of command execution
from the user:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -pathid 1
-s
KAPL01061-I 1 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
#
(2) To Display the Format of the Offline Operation
-help
Displays the format of the
offline
operation.
Example
The following example shows how to display the format of the
offline
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -help
offline:
Format
dlnkmgr offline [-path] -hba HBAPortNumber.BusNumber
[-s]
dlnkmgr offline [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -device SCSI_Device_Name [-s]
Valid value