manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 625 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 625

8. Messages

601

all of the DVD-ROM files.

KAPL09603-E

The installation will now stop because a command or utility 
cannot be executed. Confirm that the command or utility (

aa...aa

) 

exists, and that you have the proper permission.

Details

aa...aa

: Name of the command or utility that cannot be executed.

Action

•

When the output information is an HDLM utility:
If an installation is performed from the DVD-ROM, confirm that the 

DVD-ROM is not damaged.
If an installation is performed by using files copied from the DVD-ROM, 

re-copy all of the DVD-ROM files. After that, confirm the permission of the 

HDLM utility that caused the error.

•

When the output information is an OS command:
Confirm that the OS command exists, and that you have the proper 

permission.

KAPL09604-E

A system error occurred. The installation will now stop.

(command = 

aa...aa

, error code = 

bb...bb

)

Details

aa...aa

: Command that failed

bb...bb

: Return value

Action

Acquire the log 

/var/tmp/hdlm_installux_sh.log

, and then contact your 

HDLM vendor or, if you have a maintenance contract, contact the maintenance 

company.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments