Hitachi Dynamic Link Manager, User Manual

Page: 728 / 746

C. Functional Differences Between Versions of HDLM
704
using the
dlmcfgmgr
utility.
C.5 Functional Differences Between Version 5.9.1 or Later and
Versions Earlier Than 5.9.1
„
In versions earlier than 5.9.1, the timeout value of
SCSI INQUIRY
is fixed.
Therefore, depending on the connected storage system, a timeout occurs when the
response for
SCSI INQUIRY
is delayed.
In versions 5.9.1 or later, you can use the
dlmsetopt
utility to customize the
timeout value according to the storage system in use.
„
In versions earlier than 5.9.1, the message below will not be output when you
install HDLM. In versions 5.9.1 or later, the following message will be output
when you install HDLM.
•
Preparing packages for installation...
•
HDLM-
x.xx.x.xxx.
-
xx
The following shows an execution example in Red Hat Enterprise Linux AS4:
# /media/cdrom/installhdlm
KAPL09093-I HDLM
xx-xx
will be installed. Is this OK ? [y/n]:
y
Preparing packages for installation...
KAPL09076-I The permanent license was installed.
HDLM-
x.xx.x.xxx-xx
KAPL09043-I The installation of HDLM-
x.xx.x.xxx-xx
completed
successfully.
#
C.6 Functional Differences Between Version 5.9 or Later and
Versions Earlier Than 5.9
The function for operating HDLM from the HDLM GUI or HDLM Web GUI is no
longer supported.
C.7 Functional Differences Between Version 5.8 or Later and
Versions Earlier Than 5.8
Table C-1: JRE/JDK Version Required for HDLM GUI describes the version of the
JRE or JDK required to use the HDLM GUI on a host.