Hitachi Dynamic Link Manager, User Manual

Page: 597 / 746

8. Messages
573
ee...ee : Target ID (same as PathName of
view -path
) (hexadecimal number)
ff...ff : HLU number (same as PathName of
view -path
) (hexadecimal number)
gg...gg : Dev number (same as DNum of
view -path
) (decimal (base-10)
number)
hh...hh : Host device name (same as HDevName of
view -path
)
Action
There could be an error in the path. See 5.3 What To Do for a Path Error and
restore the path displayed in the message to running status.
KAPL08023-I
A path was recovered. PathID =
aa...aa
, PathName =
bb...bb
.
cc...cc
.
dd...dd.ee...ee
, DNum =
ff...ff
, HDevName =
gg...gg
Details
aa...aa : Path ID (same as PathID of
view -path
) (decimal (base-10) number)
bb...bb : Host port number (same as PathName of
view -path
) (hexadecimal
number)
cc...cc : Bus number (same as PathName of
view -path
) (hexadecimal number)
dd...dd : Target ID (same as PathName of
view -path
) (hexadecimal number)
ee...ee : HLU number (same as PathName of
view -path
) (hexadecimal number)
ff...ff : Device number (same as DNum of
view -path
) (decimal (base-10)
number)
gg...gg : Host Dev name (same as HDevName of
view -path
)
Action
None.
KAPL08026-E
An error occurred on all the paths of the LU. PathID =
aa...aa
Details
An error occurred in the last, remaining path of an LU. (This is most likely as a
result of a disconnection.)
aa...aa : Path ID (same as PathID of
view -path
) (decimal (base-10) number)
Action
Errors are detected in all the paths connected to the LUs. See 5.3 What To Do for
a Path Error to make the path shown in the error message or the paths connected
to the target LU.