manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 133 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 133

3. Creating an HDLM Environment

109

•

HotPlug

•

SystemManager linkage

Note that HDLM cannot use the functions provided by ServerConductor/

DeploymentManager other than the following:

•

Backup and restoration

•

BIOS/firmware updating

For details on the functions provided by ServerConductor/DeploymentManager, see 

the manual 

ServerConductor/DeploymentManager User's Guide

.

3.1.5 Related Products When Using Red Hat Enterprise Linux 6

The following describes related products when Red Hat Enterprise Linux 6 is used.

(1) Cluster Software Supported by HDLM (If an FC-SAN Is Used)

When you use HDLM in a cluster configuration, you must install the same version of 

HDLM on all the nodes that comprise the cluster. If different versions of HDLM are 

installed, the cluster system may not operate correctly. If the 

HDLM

 

Version

 and 

Service

 

Pack

 

Version

, which are displayed by executing the following command, 

are the same, the versions of HDLM are the same:

 
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
 

Use RHCM to build a cluster configuration.

(2) Volume Managers Supported by HDLM

Table 3-28: Volume Managers When Using Red Hat Enterprise Linux 6

 lists and 

describes the related programs when using a volume manager.

Table 3-28:

Volume Managers When Using Red Hat Enterprise Linux 6

(3) File Systems Supported by HDLM

Table 3-29: Supported File Systems When Using Red Hat Enterprise Linux 6

 lists and 

describes the related programs when using the file system.

Kernel architecture

Kernel

Volume manager

IA32

2.6.32-71.el6.i686

LVM2.02.72-8.el6

EM64T/AMD64

2.6.32-71.el6.x86_64

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments