Hitachi Dynamic Link Manager Page 189 User Manual Download

Page: 189 / 746

3. Creating an HDLM Environment

165

20. Mount the logical volume that was moved.

In the following example, the logical volume is

/dev/vg01/lvol1

and the

command mounts the volume on

/mnt/lvol1

# mount /dev/vg01/lvol1 /mnt/lvol1

21. Specify the settings required for using virtual environments.

If you are using Xen, set up Xen to use HDLM devices in domainU. If you are

using KVM, register HDLM devices into the hardware configuration file. For

details on operating environments for the virtual environments supported by

HDLM, see

3.1.13 Virtual Environments Supported by HDLM

. For details on

how to set up a virtual environment, see

3.11 Settings for Xen

3.12 Settings

for KVM

22. Specify the settings required for operations in a cluster configuration.

For a cluster configuration, change the logical device file names of SCSI devices

specified in the cluster to logical device file names of HDLM devices.
For details on setting the cluster software, see

3.13 Settings for Heartbeat

3.14 Settings for Oracle RAC

3.15 Settings for the RHCM

, or

3.16 Settings for

VCS

3.6.6 Unattended Installation of HDLM

When you perform a new installation, re-installation, or upgrade installation of

HDLM, you can choose an unattended installation. An unattended installation enables

a user to install HDLM without entering information.
The procedure for performing an unattended installation of HDLM is described below.

Note that preparations before installing HDLM are required. For details about the

preparations before performing a new installation of HDLM, see

3.6.1 Preparations

for a New Installation of HDLM

. For details about the preparations before performing

a re-installation or an upgrade installation of HDLM, see

3.6.3 Preparations for an

Upgrade Installation or Re-installation of HDLM

Log on to Linux as the root user.

In the following cases, prepare the license key or the license key file:

•

If you are installing HDLM for the first time

•

If you are upgrading or re-installing HDLM after the licensing term has

expired

If the directory that contains the license key or the license key file is specified in

the installation information settings file, you can use any storage directory name

and file name. The license key file or license key is not deleted after the

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands

Hitachi Dynamic Link Manager, User Manual

Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands