Hitachi Dynamic Link Manager, User Manual, Page: 461 / 746

6. Command Reference
437
#
When you use cluster software, the settings of the cluster function and the kinds
of cluster servers are not displayed. However, the cluster function will operate
normally.
Examples
Example 1
The following example shows how to display information about the HDLM
function settings.:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -sfunc
HDLM Version :
x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster :
Elog Level : 3
Elog File Size(KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace Files Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Reservation Status :
Intermittent Error Monitor : off
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 2
The following example shows how to display information about the HDLM
manager:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive
x.x.x-xx
yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 3
The following example shows how to display information about the HDLM alert
driver:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -adrv