manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 623 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 623

8. Messages

599

aa...aa

: 

/

HDLM installation directory

, 

/

HBsA installation directory

Action

Reinstall HDLM.

KAPL09501-E

HDLM is not installed on this system.

Details

An SP cannot be applied because HDLM is not installed on the system.

Action

Check whether HDLM has been correctly installed.

KAPL09505-E

aa...aa

 cannot be applied to the installed 

bb...bb

.

Details

This HDLM or SP (

aa...aa

) cannot be used for an upgrade installation or 

re-installation on the already installed HDLM or installed SP (

bb...bb

).

aa...aa

: the version of HDLM or SP currently being installed

bb...bb

: the version of HDLM or SP already installed

Action

An upgrade installation or re-installation cannot be performed on an already 

installed HDLM or SP. 
When installing HDLM: First uninstall the installed HDLM or SP, and then 

perform a new installation.
When installing a SP: Obtain, and then install an SP or corrected version that can 

be applied to the installed version of HDLM.

KAPL09509-E

Service Pack 

aa...aa

 cannot be installed. The same version has 

already been installed.

Details

The version of the SP being installed is the same as the already installed SP. 

Installation of the SP has stopped.

aa...aa

: Version of the SP being installed

Action

You do not have to install the SP. Keep using HDLM as is.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments