manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 608 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 608

8. Messages

584

KAPL09092-I

The installation was stopped because a stop request was 
received.

Details

The installation was aborted, because a stop request was received.

Action

Installation was terminated before all processing could be completed. If the 

HDLM RPM has been installed, then use the rpm command to perform 

uninstallation.

KAPL09093-I

aa...aa

 will be installed. Is this OK? [y/n]: 

Details

The message checks whether you want to install 

aa...aa

.

aa...aa

: The version of HDLM to be installed, or the version of the HDLM SP to 

be installed

Action

Please enter "

y

" to install, and "

n

" to abort the installation.

KAPL09094-W

The entered value is invalid. Re-enter [y/n]: 

Details

The message checks whether you want to correct an invalid value.

Action

Please enter "

y

" or "

n

".

KAPL09095-E

The entered value is invalid. The installation has been stopped.

Details

The entered value is invalid. The installation has been stopped.

Action

To install HDLM, please re-execute the HDLM installation program.

KAPL09096-I

The user stopped the installation.

Details

Installation was aborted by the user.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments