manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 163 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 163

3. Creating an HDLM Environment

139

3.6 Installing  HDLM

The following section describes how to install HDLM for a new installation, for a 

re-installation, and for an upgrade installation. Depending on the procedure, the host 

might have to be restarted after HDLM is installed. HDLM can also be installed by 

performing an unattended installation, which enables a user to install HDLM without 

entering information. Select the procedure suitable for your environment.
To create an HDLM device, the HDLM configuration definition utility 

dlmcfgmgr

 is 

used. For details on the 

dlmcfgmgr

 utility, see 

7.3 dlmcfgmgr Utility for Managing 

the HDLM Configuration

.

If you want to install HDLM in a boot disk environment that uses SCSI devices, see 

3.7 Installing HDLM for Managing Boot Disks

.

HDLM supports md devices in a Red Hat Enterprise Linux AS4/ES4 environment. If 

you want to perform a new installation of HDLM in an environment where an md 

device has been activated, see 

3.9.3 Using HDLM in an md Device Environment

.

3.6.1 Preparations for a New Installation of HDLM

This section describes the preparations required before newly installing HDLM. This 

includes backing up devices to be managed by HDLM and setting up the hardware and 

volume management software.

(1) Operations Required for Devices to Be Managed by HDLM

If any devices to be managed by HDLM are operating, you need to perform the 

following procedure.
To prepare a device that is already operating:
1.

Terminate all processes of applications that are accessing devices to be managed 

by HDLM.

2.

If necessary, back up all devices that are to be managed by HDLM.

3.

Unregister the devices.
If a device to be managed by HDLM is registered in a program, including cluster 

software (excluding the volume management software), release the registration.
When accessing a device that is to be managed after HDLM installation, the 

setting name used until now cannot be used for access because the logical device 

file name for the HDLM device that HDLM creates is used.

4.

Unmount the disks.
If the disks to be managed by HDLM were mounted by specifying SCSI devices, 

unmount them.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments