manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 88 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 88

3. Creating an HDLM Environment

64

HDLM supports an environment where an IPF kernel is installed on a system that 

uses an Intel CPU.

#4

Note the following in an EM64T/AMD64 environment:

•

HDLM supports an environment where an EM64T/AMD64 kernel is 

installed on a system that uses an Intel CPU or AMD Opteron CPU.

•

In an EM64T/AMD64 environment, the RPM (Red Hat Package Manager) 

packages listed below are required. Install these RPM packages before 

installing HDLM:

- +-

RPM package version

.i386.rpm

- libgcc-

RPM package version

.i386.rpm

- glibc-

RPM package version

.i686.rpm

RPM package version depends on the OS version you are using.

Table 3-4:

Red Hat Enterprise Linux 6 Kernels Supported by HDLM

#1

Only kernels that are provided by OS distributors in binary format are supported.

#2

HDLM supports an environment where an IA32 kernel is installed on a system 

that uses an Intel CPU or AMD Opteron processor.

#3

Note the following in an EM64T/AMD64 environment:

•

HDLM supports an environment where an EM64T/AMD64 kernel is 

installed on a system that uses an Intel CPU or AMD Opteron CPU.

•

In an EM64T/AMD64 environment, the RPM (Red Hat Package Manager) 

packages listed below are required. Install these RPM packages before 

installing HDLM:

- +-

RPM package version

.i686.rpm

- libgcc-

RPM package version

.i686.rpm

Kernel architecture

#1

Kernel

IA32

#2

2.6.32-71.el6.i686

EM64T/AMD64

#3

2.6.32-71.el6.x86_64

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments