![background image](http://html.mh-extra.com/html/hitachi/dynamic-link-manager/dynamic-link-manager_user-manual_145987466.webp)
6. Command Reference
442
information for all the paths in ascending order of AutoPATH_IDs.
These sub-parameters are:
-hdev
host-device-name
Displays information only for the paths accessing the specified host device.
Specify the name of the logical device file (minus the partition number),
/
dev/sddlm
[
aa-pap
], for the HDLM device. For details on logical device
files for HDLM devices, see
2.6 Logical Device Files for HDLM Devices
.
The
host-device-name
string is case-sensitive.
When you specify this parameter,
HDevName
is displayed by default. It is not
necessary to specify
hd
for the
-item
parameter.
-stname
Use this parameter to display the model ID of the storage system in the
product ID element of the
DskName
field. When this parameter is omitted,
the command displays the product ID or emulation type of the storage system
instead.
For details about the information to be displayed for product IDs, see
Table 6-14: Product ID displayed by the view -path operation
.
When you use this parameter,
DskName
is displayed by default. It is not
necessary to specify
dn
for the
-item
parameter.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order, according
to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of the
storage system (
DskName
), the second sorting key is the value specified by
the
-srt
parameter, and the third sorting key is AutoPATH_ID.
The available parameter values to specify the second sorting key are:
•
pn
: Path name
•
lu
: LU number of the storage system
•
cp
: Port number of the CHA
When the
-srt
parameter is omitted, the path information is listed in order
of ascending AutoPATH_IDs.
When you use this parameter, the items used for the sorting keys (DskName,
AutoPATH_ID, and the item specified by this parameter) are displayed by
default. Therefore, it is not necessary to specify these items for the
-item
parameter.
Summary of Contents for Dynamic Link Manager
