manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 609 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 609

8. Messages

585

Action

None.

KAPL09097-E

A package installable on this system was not found. Please check 
whether HDLM is supported for this system. For details about 
installing the package on a supported OS, refer to the HDLM 
User's Guide section "Hosts and OSs Supported by HDLM".

Details

A suitable package for installation on this system could not be found.

Action

Please check whether HDLM is supported for this system. For details about 

installing the package on a supported OS, see 

3.1.1 Hosts and OSs Supported by 

HDLM

.

KAPL09098-E

An attempt to install 

aa...aa

 has failed. Code = 

bb...bb

Details

An attempt to install 

aa...aa

 has failed. 

aa...aa

: Program name

bb...bb

: Code

 

(decimal number).

Action

Please re-install HDLM after checking the error information and resolving the 

problems.

KAPL09113-E

There is no installable license key in the license key file. File 
name = 

aa...aa

Make sure that the license key file is correct, and then 
re-install HDLM.

Details

There is no HDLM-installable license key in the license key file.

aa...aa

: 

/var/tmp/hdlm_license

Action

Make sure that the license key file is correct, and then re-install HDLM.

/var/tmp/hdlm_license

KAPL09114-I

There is no license key file. File name = 

aa...aa

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments