Hitachi Dynamic Link Manager Page 216 User Manual Download

Page: 216 / 746

3. Creating an HDLM Environment

192

After:

title sd-Red Hat Enterprise Linux (2.6.18-194.el5)

•

When LILO or ELILO is used as the boot loader:
Change the underlined text as follows:
Before:

label=HDLM_194.EL

After:

label=sd-HDLM_194.EL

Specify the SCSI device you checked in step 3 for

root

in the boot loader

configuration file.
Change the specification for

root

contained in the configuration that you copied

in step 5.

•

When GRUB is used as the boot loader:
Add

root=

SCSI-device

to the

kernel

line.

title Red Hat Enterprise Linux (2.6.18-194.el5)

root (hd0,0)

kernel /vmlinuz-2.6.18-194.el5 ro

option

ramdisk_size=18958 root=/dev/sda2

option

•

When LILO or ELILO is used as the boot loader:
Add

root=

SCSI-device

as the last line of the configuration.

Specify the initial RAM disk image file for the SCSI device, for

initrd

contained in the boot loader configuration file.
Change the

initrd

specification in the configuration that you copied in step 5.

If you are using a Xen kernel, change the

initrd

file name specified in

module

to the initial RAM disk image file for the SCSI device. For details on Xen kernels,

see

Table 3-47: Xen Hypervisor Operating Environments Supported by HDLM

If any options have been specified to suit the user environment, take care not to

delete those options.
Create the initial RAM disk image file for the SCSI device according to the

mkinitrd

command documentation for the OS.

In the boot loader configuration file, edit the settings to be used during a boot.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands

Hitachi Dynamic Link Manager, User Manual

Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands