Hitachi Dynamic Link Manager Page 654 User Manual Download

Page: 654 / 746

8. Messages

630

KAPL10365-W

The LDEV for an HDLM device has changed. The processing for that
HDLM device will be cancelled. HDLM device =

aa...aa

. Execute the

HDLM-configuration definition utility (dlmcfgmgr) with the -v
option, and then check the configuration of the HDLM device.

Details

The processing for the HDLM device was interrupted because an LDEV

corresponding to an HDLM device was changed.

aa...aa

: The logical device file name of the HDLM device

Action

Execute the HDLM-configuration definition utility (

dlmcfgmgr

) with the

-v

option, and then check the configuration of the HDLM device. For details on the

dlmcfgmgr

utility, see

7.3 dlmcfgmgr Utility for Managing the HDLM

Configuration

KAPL10366-I

Unsupported SCSI device was found. Device =

aa...aa

Details

The SCSI device output in this message is not supported.

aa...aa

: Logical device file name of HDLM device

Action

None.

KAPL10641-I

Reservation Key will now be cleared. Is this OK? [y/n]:

Details

Enter

to clear and

to not clear the reservation key.

Action

None.

KAPL10642-I

Reservation Key of

aa...aa

was cleared.

Details

The reservation key has been cleared.

aa...aa

: Logical device file name for the HDLM management-target device

Action

None.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands

Hitachi Dynamic Link Manager, User Manual

Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands