Hitachi Dynamic Link Manager, User Manual

Page: 543 / 746

7. Utility Reference
519
Legend:
Optional: If a key and its setting are not specified, the installer uses the default.
#1
If you are upgrading or re-installing HDLM, the current configuration is applied
for any setting that is not specified.
#2
For details about the functions set by these keys, see 6.6 set (Sets Up the
Operating Environment) .
#3
auto_failback
Specify one of the following values to
indicate whether to enable or disable the
automatic failback function for failed paths:
on
: Enabled (default)
off
: Disabled
Optional Optional 3
auto_failback_interv
al
Specify the interval in minutes from the time
the previous path status check finished until
the time the next path status check started.
You can specify a check interval from
1
to
1440
. The default is
1
.
Optional Optional 4
intermittent_error_m
onitor
#3
Specify one of the following values to
indicate whether to enable or disable
intermittent error monitoring:
on
: Enabled
off
: Disabled (default)
Optional Optional 3
intermittent_error_m
onitor_interval
Specify the interval in minutes that
monitoring for intermittent errors is
performed.
You can specify a check interval from
1
to
1440
. The default is
30
.
Optional Optional 4
intermittent_error_m
onitor_number
Specify the number of times an error occurs.
You can specify a value from
1
to
99
. The
default is
3
.
Optional Optional 2
Key name
#1
Description
#2 Necessity of
definition
Maxim
um
numbe
r of
charac
ters
New
installat
ion
Upgrad
e
installat
ion or
re-insta
llation