Hitachi Dynamic Link Manager Page 599 User Manual Download

Page: 599 / 746

8. Messages

575

8.9 KAPL09001 to KAPL10000

KAPL09001-E

There is no system management permission. Login with root
permission and re-install HDLM.

Details

The current user does not have the necessary administrator permission to install

HDLM.

Action

KAPL09003-E

Cannot install in this system. Install HDLM on a supported OS.

Details

HDLM cannot be installed on this system.

Action

See

3.1.1 Hosts and OSs Supported by HDLM

and install HDLM in a supported

OS system.

KAPL09005-E

Could not stop the HDLM manager. Stop it manually, and then try
the installation program or the uninstallation program again.

Details

An attempt to stop the HDLM manager service failed.

Action

Stop the HDLM manager manually, and then re-execute the installation program

or the uninstallation program.

KAPL09011-E

Cannot find a license key file /etc/opt/DynamicLinkManager/
dlm.lic_key.

Details

The license key file,

/etc/opt/DynamicLinkManager/dlm.lic_key

cannot be found in the specified directory.

Action

Create a license key file, and re-execute the installation program.

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands

Hitachi Dynamic Link Manager, User Manual

Search results

Summary of Contents for Dynamic Link Manager

Reviews:

Related manuals for Dynamic Link Manager

Brands by name

Popular brands