Hitachi Dynamic Link Manager, User Manual, Page: 638 / 746

8. Messages
614
| -u {special-file-name ... | all}
|-logfs [log-file-size]}
Details
Since the parameter of the HDLM-configuration definition utility (
dlmcfgmgr
)
was inaccurate, execution of the
dlmcfgmgr
utility failed. For details on the
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for Managing the HDLM
Configuration .
Action
Specify the correct options, and then re-execute the
dlmcfgmgr
utility.
KAPL10320-E
The file format is invalid. File name =
aa...aa
. Refer to the
Messages section of the HDLM User's Guide for instructions to
correct this problem.
Details
The file format is invalid.
aa...aa : file name
Action
Re-execute the HDLM-configuration definition utility (
dlmcfgmgr
). If the same
message is output, execute the
DLMgetras
utility for collecting HDLM error
information, and then contact your HDLM vendor or maintenance company if
you have a maintenance contract for HDLM.
For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting
HDLM Error Information . For details on the
dlmcfgmgr
utility, see
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration .
KAPL10321-W
The specified HDLM device is invalid. Device =
aa...aa
. Specify a
valid logical device file name of an HDLM device, and then
execute the dlmcfgmgr utility.
Details
Executing the HDLM-configuration definition utility (
dlmcfgmgr
) failed
because the logical device file name of the HDLM device was incorrect.
aa...aa : Logical device file name of HDLM device
Action
Specify a correct logical device file name of an HDLM device, and then
re-execute the
dlmcfgmgr
utility. For details on the
dlmcfgmgr
utility, see
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration .