manualshive.com logo in svg

Hitachi Dynamic Link Manager, User Manual, Page: 160 / 746

Share
Download
Hitachi Dynamic Link Manager User Manual Download Page 160

3. Creating an HDLM Environment

136

configuration, memory might become insufficient due to the HAL daemon

#

. In 

this case, the host will not respond.
To avoid this, stop the HAL daemon when executing the 

dlmcfgmgr

 utility. The 

following procedure shows how to stop the HAL daemon.
#

The HAL daemon detects hardware configurations changes, for example, 

when a USB device or CD-ROM is inserted.

To stop the HAL daemon:
1.

Check the status of the HAL daemon.
Execute the 

/sbin/service

 command to check the HAL daemon status. If 

the daemon is running, 

running

 will appear.

 

# /sbin/service haldaemon status

 
If the daemon is not running, 

stopped

 will appear.

2.

Check the result of step 1. If the HAL daemon is running, stop the daemon.
Execute the 

/sbin/service

 command to stop the HAL daemon. Note that 

it might take a while to stop the daemon completely.
 

# /sbin/service haldaemon stop

 

3.

Make sure that the HAL daemon is stopped.
Execute the 

/sbin/service

 command to make sure that the HAL daemon 

is not running.
 

# /sbin/service haldaemon status

 

4.

Execute the dlmcfgmgr utility (

dlmcfgmgr -r or dlmcfgmgr -i

) to 

configure the HDLM device.
 

# /sbin/dlmcfgmgr -r

or

Summary of Contents for Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments