Hitachi Dynamic Link Manager, User Manual, Page: 159 / 746

3. Creating an HDLM Environment
135
# grep DLM /etc/rc.d/rc.sysinit
# grep DLM /etc/init.d/halt
If nothing is output after command execution, HDLM information is missing.
For details about the
dlmupdatesysinit
utility, see 7.8 dlmupdatesysinit
Utility for Updating System Scripts .
„
In an environment that uses SUSE LINUX Enterprise Server, after upgrading the
aaa_base
,
raidtools
,
mdadm
, or
lvm2
package after HDLM installation and
then restarting the OS, you must execute the
dlmupdatesysinit
utility to
update the system scripts if the following conditions are satisfied:
• An HDLM device for which automatic mounting is specified has not been
mounted.
•
An md device created on an HDLM device has not been activated.
• An LVM created on an HDLM device has not been activated.
• HDLM information is missing in the
/etc/init.d/boot.localfs
file,
the
/etc/init.d/boot.md
file, or the
/etc/init.d/lvm2
file.
Confirm that the HDLM information is missing by executing the following
commands:
# grep Required-Start /etc/init.d/boot.localfs
# grep Required-Start /etc/init.d/boot.md
# grep Required-Start /etc/init.d/boot.lvm
If the information in
boot.hdlm
is not output after command execution,
HDLM information is missing.
For details about the
dlmupdatesysinit
utility, see 7.8 dlmupdatesysinit
Utility for Updating System Scripts .
3.5.3 Notes on Installing HDLM
„
A license key is required to perform a new installation of HDLM.
To update the HDLM license, execute the
dlnkmgr
command's
set -lic
operation. The expiration time of the license key is determined by the type of
license key specified in the license key file or entered by the user. For information
on license key types and the
set
operation, see 6.6 set (Sets Up the Operating
Environment) .
„
When the
dlmcfgmgr
utility is executed to change the HDLM device