Hitachi Dynamic Link Manager, User Manual

Page: 432 / 746

6. Command Reference
408
AutoPATH_ID { 000000 - 999999 }(Decimal)
KAPL01001-I The HDLM command completed normally.
Operation name = offline, completion time = yyyy/mm/dd
hh:mm:ss
#
Reference
Using the
view
operation together with standard UNIX commands enables you to
filter the path information listed for a specific HBA port or CHA port. For details about
the
view
operation, see 6.7 view (Displays Information) .
We recommend that you use the following command and verify the information on the
target paths before you execute the
offline
operation to place offline all the paths
connected to a specific HBA port or CHA port.
Example 1
The following example shows how to filter and display the information on all
paths that pass through the HBA port whose host port number is
0004
and bus
number is
0000
:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep
0004.0000
The above command will display information on all the paths that pass through
the specified HBA port.
Example 2
The following example shows how to filter and display the information on all the
paths that pass through the CHA port
0A
of the Thunder 9500V series:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname |
grep 9500V | grep 0A
The above command will display information pertaining to only those paths that
pass through the specified CHA port.