Hioki RM3545, Instruction Manual, Page: 278 / 364

Chapter 13 Specifications
270
(3) Communications interfaces
Interface types GP-IB/ RS-232C/ PRINTER/ USB
Default setting RS-232C
 RS-232C and printer communications settings
Communication
contents Remote control, measured value output (export)
Transfer method Asynchronous, Full duplex
Transmission speed 9,600bps (default setting)/ 19,200bps/ 38,400bps/ 115,200bps
Data length 8 bit
Stop bit 1
Parity none
Delimiter Transmit: CR+LF, Receive: CR or CR+LF
Handshaking No X-flow, no hardware flow
Protocol Non-procedure
Connector Male 9-pin D-sub, with #4-40 attachment screws
 USB
Communication
contents Remote control, measured value output (export)
Connector Series B receptacle
Electrical specifications USB2.0 (Full Speed)
Class (mode) CDC Class (COM mode), HID Class (USB keyboard mode)
Default setting COM mode
 Printer
Operation Prints data when the PRINT signal is input or when the print key is pressed.
Compatible printers Interface: RS-232C, no. of characters per line: 48 (single-byte) or more
Communication speed: 9,600bps/ 19,200bps/ 38,400bps/ 115,200bps
Data length: 8bit, Parity: none, Stop bit: 1bit, Flow control: none,
Message terminator (delimiter): CR+LF
Control codes: Must be able to print plain text directly.
Printing Contents Resistance measured values, temperature measured values, judgment re-
sults, measurement conditions, statistical results
Interval ON/ OFF
Interval time 0 to 3,600 s
Statistical calculations
clear ON/ OFF
Number of columns
printed per row 1 column/ 3 columns
Default setting Interval: OFF, interval time: 1 s, statistical calculations clear: OFF,
number of columns printed per row: 1 column