EXHAUST (J05E)
11–44
1.
Checking the engine and repair or replace defective parts if any.
2.
Dismount the DPR filter from the vehicle.
Reference: EXHAUST (J05E), DPR CLEANER, REPLACE-
MENT, REMOVING DPR CLEANER (Page 11-37)
3.
Inspect the status of the DPR filter rear surface.
Reference: EXHAUST (J05E), DPR CLEANER, OVERALL
OPERATION FLOW, INSPECT INSIDE THE DPR FILTER (Page
11-45)
Standard value: No soot escape
NO
YES
LIST OF STANDARD VALUES FOR DIFFERENTIAL
PRESSURE INSPECTION
5
FOR OTHERS THAN DPR DTC CODE IS DISPLAYED
SHTS021271000060
Replace with a new DPR filter and install it on the
vehicle.
Reference: EXHAUST (J05E), DPR CLEANER,
REPLACEMENT, MOUNTING DPR CLEANER
(Page 11-38)
! CAUTION
After the installation, regenerate the DPR cleaner
manually and recheck the differential pressure.
Make sure it is within the standard value and
deliver the vehicle.
Perform soot cleaning to the DPR filter and then install it on the vehicle.
Reference: EXHAUST (J05E), DPR CLEANER, REPLACEMENT, MOUNTING DPR CLEANER (Page 11-38)
! CAUTION
•
After the installation, regenerate the DPR cleaner manually and recheck the differential pressure.
Make sure it is within the standard value and deliver the vehicle.
•
If the differential pressure is out of the standard value, perform ash cleaning.
Engine model
Engine no load
maximum revolution speed
Differential pressure
(kPa {kgf/cm
2
, lbf/in.
2
})
J05E
2,800 r/min.
5.0 {0.05, 0.7}
