EMISSION CONTROL (J05E)
8–17
(4)
Connect the oil hose to the closed ventilator and flywheel housing
with 2 clamps.
NOTICE
•
Install the new clamp.
•
Do not twist the oil hose.
•
Connect it in a way that the white mark is positioned on the
vehicle rear side. (upper oil hose)
•
Insert it in a way that the yellow mark is positioned on the
vehicle rear side and mount it by aligning with the engine
mark. (lower oil hose)
Standard value: (X) 6 mm {0.236 in.} or less
SST:
S0920-E0010
Vent pipe tool
(5)
Attach the hose of the vehicle, install the clamp is crimped using a
SST.
Standard value: (X) 6 mm {0.236 in.} or less
SST:
S0920-E0010
Vent pipe tool
(6)
Attach the hose on the engine side, attach the clamp is crimped
using a SST.
Standard value: (X) 6 mm {0.236 in.} or less
SST:
S0920-E0010
Vent pipe tool
(7)
Connect the ventilator hose B to the closed ventilator and cylinder
head with 2 clamps and the bolt.
Tightening Torque:
31 N·m {316 kgf·cm, 23 lbf·ft}
NOTICE
Do not twist the ventilator hose.
(8)
Connect the ventilator hose A to the closed ventilator and intake
hose with 2 clamps and the bolt.
Tightening Torque:
31 N·m {316 kgf·cm, 23 lbf·ft}
NOTICE
Do not twist the ventilator hose.
Rh Top
Fr
SST
CLAMP
SHTS021270700033
SST
Rh
Top
Fr
CLAMP
SHTS021270700034
SHTS021270700035
VENTILATOR
HOSE A
CLOSED
VENTILATOR
VENTILATOR
HOSE B
SHTS021270700036
