COOLING (J05E)
12–11
5.
CONNECTING THE RADIATOR HOSE
(1)
Align the markings, and connect the radiator outlet hose to the
radiator lower tank with the clamp.
! CAUTION
•
If crack or peeling is found with the inner surface of the radi-
ator outlet hose inserting area, replace it.
•
Do not use soap water to radiator outlet hose inserting area.
•
Do not reuse the clamp.
•
Be sure that the distance between the hose end and the
clamp is 0-4 mm {0-0.157 in.} when mounting the clamp.
•
Insert the hose to the stopper.
•
Check that there is no bending of the clamp and landing
upon the pipe spool.
•
If the clamp is installed at an unspecified location, the clamp
will land on the pipe spool, resulting in coolant leakage.
RADIATOR
OUTLET HOSE
SHTS021271100016
BENDING OF
CLAMPING
㪩㪬㪥㪥㪠㪥㪞㩷㪘㪞㪩㪦㪬㪥㪛㩷
㪫㪦㩷㪧㪠㪧㪜㩷㪪㪧㪦㪦㪣
RADIATOR OUTLET HOSE
CLAMP
0-4mm {0-0.157 in.}
SHTS021271100017
